We recently had this lovely Astra H 888 CDTi (Z19DTH engine with M32 gearbox) in for a lighter single mass flywheel (removing the dual mass flywheel) and sprung clutch assembly due to slight clutch slip on the factory clutch. At the same time we also overhauled the gearbox fitting new bearings throughout and the later […]
Tag: M32
M32 Gearbox Bearings and Late Endcase
Another M32 gearbox from an Astra H in for bearing replacement and upgrade to the later endcase with larger endcase bearings. This gearbox had covered some 90,000 miles before need to have the bearings replaced, and whilst the box was off the car for overhaul the later endcase which features additional oil galleries and larger […]
M32 Gearbox Overhaul – Astra H SRi 1.9CDTi
Another M32 gearbox overhaul, this time on an Astra H 1.9 CDTi 5 Door. Once the engine subframe and gearbox had been removed the gearbox could be stripped down, cleaned and inspected and then rebuilt with full bearing replacement (all 8 bearings) and new driveshaft oil seals. Do not forget, even if you are unable […]
Revised M32 Endcase and Larger Bearings
As part of our M32 gearbox repair service, we are now able to offer a new revised M32 gearbox endcase. This later revised end case, introduced during 2012 for production vehicles, features additional oil galleries for improved lubrication of the end case bearings and also the end case bearings are of a larger diameter (62mm […]
Astravan 1.9 CDTi Gearbox Overhaul and Uprated Clutch
Another M32 gearbox overhaul. Again we removed the gearbox to carry out a full strip down, inspection and clean of the components including the transmission case. It was then rebuilt with new bearings throughout and the revised end case was fitted which features additional oil galleries for better lubrication and larger end case bearings. Prior […]
Astravan 1.9 CDTi Gearbox Overhaul and Remap
This Astravan came to us for a gearbox overhaul and ecu remap and rolling road set up. We remove the gearbox, and have it fully stripped down and all the internal components are cleaned and inspected. This also allows the transmission cases to be fully clean as well, something often overlooked if bearings are replaced […]